Equipamento profissional para hospitais veterinários e salões de beleza para animais de estimação | Fornecimento direto da fábrica, OEM personalizado e entrega rápida.
A double-tier 304 stainless-steel cage with four primary front sections, tray access zones, and a caster-mounted base for requirements-based B2B enquiries.
For clinics, animal-care facilities, distributors, and project buyers, stainless steel cages veterinary sourcing starts with a clear view of the real configuration. This double-tier cage combines four front-access sections within one mobile stainless-steel structure. The supplied configuration shows a rectangular frame, wire-mesh enclosure, individually latched front doors, pull-out metal tray zones, and a caster-mounted base.
The two-tier arrangement uses vertical space while keeping the principal access points visible from the front. Buyers can use this page for an initial requirements discussion and then confirm the application, internal dimensions, load requirements, species scope, and project conditions before ordering.
The front elevation is organized into upper and lower cage levels. Each level presents two primary mesh door sections, producing four primary front sections across the complete unit. Latch plates and horizontal latch hardware are visible on the front doors. Side and top wire-mesh panels complete the enclosure while preserving a consistent open-grid structure.
Handled tray zones sit between or beneath the cage sections. These visible pull-out areas provide a defined point for tray access without requiring an unsupported claim about cleaning time or sanitation performance. The base is fitted with casters so the assembled unit can be repositioned when site conditions and operating procedures permit.
The cage presents its primary access points on the front, allowing a team to identify the relevant section before opening a door. Separate latch hardware is visible for the front door sections, while handled tray zones provide a distinct access point below the cage floors. This arrangement supports an orderly discussion of how the unit may fit into an existing animal-care workflow.
The supplied photos show front-opening mesh doors. Door clearances, operating space, and local handling procedures should be reviewed against the intended installation area before purchase.
Latch plates and bars can be inspected in the product views. The final locking method, operating procedure, and suitability for a specific animal or use case should be confirmed for the selected order.
Pull-out metal tray zones are visible beneath the cage sections. Buyers should confirm tray construction, removal clearance, cleaning protocol, and compatible agents according to their facility requirements.
The following values come from the supplied product material and are suitable for an initial project conversation. Final drawings, order specifications, and packing details should be reconfirmed before production or shipment.
| Configuração do produto | Double-tier cage with four primary front sections |
| Material principal | 304 stainless steel |
| Dimensões totais | 80 × 80 × 160 cm |
| Acesso | Individually latched front mesh doors |
| Tray structure | Pull-out metal tray zones |
| Mobilidade | Caster-mounted base |
| Tamanho da embalagem | 86 × 86 × 165 cm |
ClearSight can coordinate a product-specific review after receiving the intended application, required quantity, destination, and project needs. The review should establish which specifications, structural options, documentation, packing arrangement, commercial terms, and schedule apply to the selected order rather than assuming that a company-level capability applies automatically to this cage.
Send the product image or page link together with the required quantity, destination, application, and any dimension or documentation needs. The image CTA is artwork; the published page should pair it with a real enquiry button or contact form.
The supplied product material identifies 304 stainless steel. Any requested material report or order-specific material requirement should be confirmed during the enquiry.
The supplied overall size is 80 × 80 × 160 cm, and the supplied package size is 86 × 86 × 165 cm. Internal dimensions were not provided and should be confirmed before technical selection.
No verified load rating or exact species scope is published on this page. Share the intended application so the supplier can evaluate and confirm the relevant requirements for the order.
This product is presented for professional veterinary and animal-care procurement. Confirm the intended species or use, internal dimensions, load requirements, door and latch procedure, installation clearance, tray-handling method, cleaning protocol, applicable documents, and local facility requirements before ordering and use. Follow the final supplier documentation and the facility’s own safety and animal-care procedures.
Dedicamo-nos exclusivamente a equipamentos veterinários e de cuidados com animais de estimação, oferecendo qualidade direta da fábrica, personalização flexível e um serviço transfronteiriço fiável para clínicas, distribuidores e compradores grossistas em todo o mundo.
Somos especializados em equipamento médico e de cuidados de beleza para animais de estimação, com um profundo conhecimento das necessidades de equipamento de clínicas e salões, o que nos permite apresentar recomendações de produtos específicas.
A nossa fábrica de 5 000 m² permite reduzir os custos intermédios. Oferecemos personalização de tamanho, logótipo e embalagem, com quantidades mínimas de encomenda flexíveis, tanto para amostras como para encomendas em grande quantidade.
Atendemos clientes em mais de 100 países com certificação CE. As encomendas normais são concluídas no prazo de 30 dias, com um serviço completo de assistência pós-venda num único balcão.
O nosso equipamento veterinário e de cuidados de beleza, vendido diretamente da fábrica, tem vindo a receber elogios constantes de clínicas veterinárias, proprietários de salões, distribuidores e importadores em toda a Europa e na América do Norte. Os nossos clientes valorizam a nossa qualidade constante, as nossas soluções OEM flexíveis e a nossa fiabilidade na entrega atempada.
Preencha o formulário abaixo com os seus requisitos, incluindo os detalhes do produto, a quantidade e as necessidades de personalização. Analisaremos a sua mensagem e responderemos no prazo de 24 horas úteis.
Reunimos as perguntas mais frequentes dos compradores de todo o mundo para o ajudar a obter respostas rapidamente. Se não encontrar o que procura, não hesite em enviar-nos uma mensagem.
Preços diretos de fábrica, controlo de qualidade rigoroso e entregas pontuais. Oferecemos um serviço de aquisição completo e fiável.
Oferecemos orçamentos, amostras, produção OEM, acompanhamento de envios e um serviço completo de apoio pós-venda.
Sim. Personalizamos o tamanho, o material, o logótipo e a embalagem com base nas suas amostras ou desenhos.
Aceitamos T/T, L/C, PayPal e Western Union. Estão disponíveis condições flexíveis para parceiros de longa data.
