Equipamento profissional para hospitais veterinários e salões de beleza para animais de estimação | Fornecimento direto da fábrica, OEM personalizado e entrega rápida.
A single-compartment stainless-steel cage with a main front gate, lower hatch, hinged top lid, wire-grid floor, black tray, and four casters for requirements-based B2B review.
For B2B buyers evaluating stainless steel cages and animal housing, this veterinary cage presents a clear single-compartment format for requirements-based animal housing and supervised holding discussions. The supplied product set shows one rectangular cage bay with a silver metal frame, vertical bars, a wire-grid floor, a black tray below the floor, four corner casters, a main front gate, a lower hatch, and a hinged top lid. The product is best presented as a physical housing unit whose fit, access, and handling details can be reviewed before quotation. The listed material identifies 304 stainless-steel cage and frame construction; that scope does not automatically cover every fitting. The ClearSight team can use the information you provide to review the intended animal profile, quantity, destination, and site conditions.
The supplied size and weight values are useful starting points for a sourcing conversation, not a substitute for a project confirmation. Internal dimensions, weight requirements, caster-brake details, cleaning compatibility, packing method, and commercial terms remain items for enquiry. This keeps the page useful for clinics, animal hospitals, distributors, importers, and project buyers while leaving unconfirmed decisions visible for the quotation stage.
The cage is shown as one undivided rectangular compartment rather than a stacked or banked cabinet. A main wire-bar gate occupies the front, with a smaller integrated lower hatch visible within the front assembly. A hinged wire-bar lid opens from the top. These are three visible access points to the same single bay, not three independent cages or separate front compartments.
This arrangement gives a buyer a concrete basis for reviewing animal fit, door clearance, staff approach, and the space required around the unit. The supplied materials do not state internal dimensions or a maximum animal-weight requirement, so those values should be confirmed against the intended animal profile before a purchase decision. The screenshot lists small animals, cats, and dogs as applicable pets; suitability still depends on the actual animal size, behavior, and confirmed cage fit.
The product is designed for a buyer who wants to inspect the physical cage system before discussing a project. The visible bars, framed access panels, floor grid, tray, and caster base can all be reviewed from the supplied photographs. The page keeps those observations separate from clinical claims: the cage is not presented as a treatment device, oxygen chamber, temperature-control unit, or outcome guarantee.
The supplied specification identifies 304 stainless steel, while the photos show the silver cage and frame. This wording is deliberately scoped to the cage and frame construction. It does not assert that the black tray, casters, locks, hinges, or every other fitting uses the same grade. Buyers who need a component-level material schedule can request confirmation before ordering.
The front gate and lower hatch provide visible front access, while the hinged top lid provides a second direction for access review. Vertical bars leave the interior visually open for inspection in the supplied views. Door swing, latch operation, working clearance, and any facility-specific handling procedure should be checked against the final placement plan.
A black tray is positioned below the wire-grid floor, and four casters are visible at the corners of the base. These details support practical conversations about tray handling, floor protection, movement, and service access. The supplied materials do not confirm brake type or whether the unit may be moved while occupied; those points belong in the pre-order review.
The values below are transcribed from the supplied specification screenshot. They help a buyer frame an initial enquiry, but the source does not label the length, width, and height order for either size sequence. Confirm the axis order, internal dimensions, animal fit, and final packing method before site-fit or freight sign-off.
| Artigo | Especificações confirmadas |
|---|---|
| Configuração do produto | One single-compartment cage |
| Cage and frame material | 304 stainless-steel cage and frame construction |
| Listed overall size | 94 × 60 × 75 cm; axis order not specified in the supplied source |
| Visible access | Main front gate, integrated lower hatch, and hinged top lid |
| Visible base | Four corner casters, wire-grid floor, and one black tray below the floor |
| Applicable pet scope | Small animals, cats, and dogs; fit confirmation required |
| Peso líquido | 15.5 kg |
| Peso bruto | 18 kg |
| Listed package size | 99 × 18 × 79 cm; axis order not specified in the supplied source |
No maximum weight, internal size, certification, warranty, packing method, or component-level material schedule is published here because those values were not confirmed for this exact configuration.
A useful enquiry starts with the decisions that affect fit and procurement. Share the intended animal profile, quantity, destination market, available space, required access clearances, and any documentation or packing needs. ClearSight can then route a requirements-based review through its B2B supply process. Any OEM/ODM request remains subject to technical feasibility, commercial review, and confirmation in the quotation; no specific option is treated as included by default.
Send the product description, quantity, destination, intended animal profile, and any site or customization requirements with your enquiry. The supplier can use that information to identify open questions before confirming a quotation. A requirements-based review is more reliable than assuming that a generic size, accessory, or customization option applies to every order.
The supplied product is a single-compartment cage with one undivided holding bay. The front gate, lower hatch, and top lid are access points to that same bay, not separate cage compartments.
The supplied table lists an overall size of 94 × 60 × 75 cm and a package size of 99 × 18 × 79 cm. It does not identify the length, width, and height order, and it does not supply internal dimensions. Confirm those details before a site-fit or freight decision.
ClearSight presents OEM/ODM review as part of its broader B2B supplier support. For this exact cage, any requested change to size, material scope, branding, structure, packing, or documentation must be submitted as a requirement and confirmed in the technical and commercial quotation.
Use the cage only under appropriate supervision and according to supplier instructions, facility procedures, and applicable animal-welfare and workplace requirements. Before placement or use, check the gate, lower hatch, top lid, latches, tray, casters, and overall stability. Confirm the intended animal fit, cleaning-agent compatibility, movement procedure, and any local documentation requirements before occupancy or shipment. Do not move the unit while occupied unless that procedure has been specifically approved for the final configuration.
Dedicamo-nos exclusivamente a equipamentos veterinários e de cuidados com animais de estimação, oferecendo qualidade direta da fábrica, personalização flexível e um serviço transfronteiriço fiável para clínicas, distribuidores e compradores grossistas em todo o mundo.
Somos especializados em equipamento médico e de cuidados de beleza para animais de estimação, com um profundo conhecimento das necessidades de equipamento de clínicas e salões, o que nos permite apresentar recomendações de produtos específicas.
A nossa fábrica de 5 000 m² permite reduzir os custos intermédios. Oferecemos personalização de tamanho, logótipo e embalagem, com quantidades mínimas de encomenda flexíveis, tanto para amostras como para encomendas em grande quantidade.
Atendemos clientes em mais de 100 países com certificação CE. As encomendas normais são concluídas no prazo de 30 dias, com um serviço completo de assistência pós-venda num único balcão.
O nosso equipamento veterinário e de cuidados de beleza, vendido diretamente da fábrica, tem vindo a receber elogios constantes de clínicas veterinárias, proprietários de salões, distribuidores e importadores em toda a Europa e na América do Norte. Os nossos clientes valorizam a nossa qualidade constante, as nossas soluções OEM flexíveis e a nossa fiabilidade na entrega atempada.
Preencha o formulário abaixo com os seus requisitos, incluindo os detalhes do produto, a quantidade e as necessidades de personalização. Analisaremos a sua mensagem e responderemos no prazo de 24 horas úteis.
Reunimos as perguntas mais frequentes dos compradores de todo o mundo para o ajudar a obter respostas rapidamente. Se não encontrar o que procura, não hesite em enviar-nos uma mensagem.
Preços diretos de fábrica, controlo de qualidade rigoroso e entregas pontuais. Oferecemos um serviço de aquisição completo e fiável.
Oferecemos orçamentos, amostras, produção OEM, acompanhamento de envios e um serviço completo de apoio pós-venda.
Sim. Personalizamos o tamanho, o material, o logótipo e a embalagem com base nas suas amostras ou desenhos.
Aceitamos T/T, L/C, PayPal e Western Union. Estão disponíveis condições flexíveis para parceiros de longa data.
