Equipamento profissional para hospitais veterinários e salões de beleza para animais de estimação | Fornecimento direto da fábrica, OEM personalizado e entrega rápida.
A stationary stainless-steel cabinet with two side-by-side bird compartments, individual front wire doors and removable collection pans.
These two-compartment gaiolas de aço inoxidável para pássaros provide two side-by-side housing spaces within one stationary cabinet. Each compartment has its own front wire door, while the solid top, side panels, rear panel and central divider define a clear physical separation between the two bays. The supplied specification identifies the intended pet scope as birds and pigeons; suitability for a particular species still depends on bird size, bar spacing and internal dimensions confirmed during project review.
The low rectangular form keeps both compartments accessible from the front. Wire-grid floors sit above removable collection pans, creating a straightforward arrangement for routine observation and debris collection without adding powered systems or unverified accessories.
The cabinet is divided into two bays by a central solid panel. Each bay has its own wire front and individual door, allowing buyers to review the access arrangement separately for each compartment. The top, sides and rear are solid panels, while the front remains visually open through the wire-grid construction. This layout is useful when a project calls for two defined bird-housing spaces in one stationary unit.
The evidence confirms the bay count, door count and general access geometry, but it does not establish clear door-opening dimensions, internal compartment measurements or safe occupancy. Those items should be matched to the intended birds before ordering.
Each compartment has a wire-grid floor positioned above a removable collection pan. Front pull handles make the two pans identifiable from the operating side of the cabinet. This separated arrangement lets the buyer review pan access for each bay and plan a routine debris-collection process around the actual installation location.
The two outward-opening wire doors provide separate front access. Door swing, clear opening and working clearance should be checked against the planned room layout before installation.
The raised wire-grid floors are visibly separated from the collection pans below. Confirm the grid and bar spacing against the size and needs of the intended bird species.
The pans pull forward by their front handles. Before use, establish a cleaning method appropriate to the confirmed stainless-steel grade, local animal-care procedures and the buyer’s required inspection frequency.
The supplied table provides overall and package dimensions for preliminary space and freight planning. Dimension orientation, manufacturing tolerances, assembled condition and freight basis should be confirmed before an order is placed.
| Artigo | Especificações confirmadas |
|---|---|
| Configuração do produto | Two side-by-side bird compartments in one cabinet |
| Material principal | Stainless steel; grade to be confirmed |
| Dimensões totais | 120 × 54 × 48 cm; orientation labels not supplied |
| Principais funções | Individual front access and wire-grid floors above removable collection pans |
| Mobilidade | Stationary base; no casters shown |
| Embalagem | 125 × 10 × 53 cm carton package |
ClearSight coordinates B2B enquiries for stainless-steel animal housing and bird-cage projects. Share the intended bird species, quantity, destination and required dimensions so the team can review the requested configuration against the available product information.
Product-specific specifications and commercial details are confirmed during enquiry. The current evidence supports a credible project discussion, while material grade, bar spacing, internal dimensions, safe occupancy, weight basis, price and minimum order quantity remain items for confirmation rather than published assumptions.
Send your project requirements for specification review. A useful enquiry should identify the birds, quantity, destination and any dimensional or material constraints so the quotation can distinguish confirmed facts from options that still require evaluation.
The supplied overall size is 120 × 54 × 48 cm, and the carton package size is 125 × 10 × 53 cm. The source does not label the orientation of each dimension, so orientation and tolerances should be confirmed before site or freight decisions are finalized.
The supplied product table lists birds and pigeons, but species fit cannot be decided from that label alone. Confirm bird size, bar spacing, internal compartment dimensions, door opening and safe occupancy for the intended use.
No fixed commercial values are confirmed in the supplied evidence. Provide the quantity and destination during enquiry so the quotation can state the applicable commercial and delivery terms.
Confirm species fit, bar spacing, internal dimensions, door clearance and safe occupancy before use. Inspect doors, latches, wire grids and collection pans before placing birds inside. Establish cleaning and inspection procedures that match the confirmed material grade and local animal-welfare requirements. This product is passive animal housing and should not be treated as a powered environmental or clinical system.
Dedicamo-nos exclusivamente a equipamentos veterinários e de cuidados com animais de estimação, oferecendo qualidade direta da fábrica, personalização flexível e um serviço transfronteiriço fiável para clínicas, distribuidores e compradores grossistas em todo o mundo.
Somos especializados em equipamento médico e de cuidados de beleza para animais de estimação, com um profundo conhecimento das necessidades de equipamento de clínicas e salões, o que nos permite apresentar recomendações de produtos específicas.
A nossa fábrica de 5 000 m² permite reduzir os custos intermédios. Oferecemos personalização de tamanho, logótipo e embalagem, com quantidades mínimas de encomenda flexíveis, tanto para amostras como para encomendas em grande quantidade.
Atendemos clientes em mais de 100 países com certificação CE. As encomendas normais são concluídas no prazo de 30 dias, com um serviço completo de assistência pós-venda num único balcão.
O nosso equipamento veterinário e de cuidados de beleza, vendido diretamente da fábrica, tem vindo a receber elogios constantes de clínicas veterinárias, proprietários de salões, distribuidores e importadores em toda a Europa e na América do Norte. Os nossos clientes valorizam a nossa qualidade constante, as nossas soluções OEM flexíveis e a nossa fiabilidade na entrega atempada.
Preencha o formulário abaixo com os seus requisitos, incluindo os detalhes do produto, a quantidade e as necessidades de personalização. Analisaremos a sua mensagem e responderemos no prazo de 24 horas úteis.
Reunimos as perguntas mais frequentes dos compradores de todo o mundo para o ajudar a obter respostas rapidamente. Se não encontrar o que procura, não hesite em enviar-nos uma mensagem.
Preços diretos de fábrica, controlo de qualidade rigoroso e entregas pontuais. Oferecemos um serviço de aquisição completo e fiável.
Oferecemos orçamentos, amostras, produção OEM, acompanhamento de envios e um serviço completo de apoio pós-venda.
Sim. Personalizamos o tamanho, o material, o logótipo e a embalagem com base nas suas amostras ou desenhos.
Aceitamos T/T, L/C, PayPal e Western Union. Estão disponíveis condições flexíveis para parceiros de longa data.
