Équipements professionnels pour cliniques vétérinaires et salons de toilettage | Vente directe d'usine, fabrication sur mesure (OEM) et livraison rapide.
A stationary stainless-steel cabinet with two side-by-side bird compartments, individual front wire doors and removable collection pans.
These two-compartment cages à oiseaux en acier inoxydable provide two side-by-side housing spaces within one stationary cabinet. Each compartment has its own front wire door, while the solid top, side panels, rear panel and central divider define a clear physical separation between the two bays. The supplied specification identifies the intended pet scope as birds and pigeons; suitability for a particular species still depends on bird size, bar spacing and internal dimensions confirmed during project review.
The low rectangular form keeps both compartments accessible from the front. Wire-grid floors sit above removable collection pans, creating a straightforward arrangement for routine observation and debris collection without adding powered systems or unverified accessories.
The cabinet is divided into two bays by a central solid panel. Each bay has its own wire front and individual door, allowing buyers to review the access arrangement separately for each compartment. The top, sides and rear are solid panels, while the front remains visually open through the wire-grid construction. This layout is useful when a project calls for two defined bird-housing spaces in one stationary unit.
The evidence confirms the bay count, door count and general access geometry, but it does not establish clear door-opening dimensions, internal compartment measurements or safe occupancy. Those items should be matched to the intended birds before ordering.
Each compartment has a wire-grid floor positioned above a removable collection pan. Front pull handles make the two pans identifiable from the operating side of the cabinet. This separated arrangement lets the buyer review pan access for each bay and plan a routine debris-collection process around the actual installation location.
The two outward-opening wire doors provide separate front access. Door swing, clear opening and working clearance should be checked against the planned room layout before installation.
The raised wire-grid floors are visibly separated from the collection pans below. Confirm the grid and bar spacing against the size and needs of the intended bird species.
The pans pull forward by their front handles. Before use, establish a cleaning method appropriate to the confirmed stainless-steel grade, local animal-care procedures and the buyer’s required inspection frequency.
The supplied table provides overall and package dimensions for preliminary space and freight planning. Dimension orientation, manufacturing tolerances, assembled condition and freight basis should be confirmed before an order is placed.
| Article | Spécifications confirmées |
|---|---|
| Configuration du produit | Two side-by-side bird compartments in one cabinet |
| Matériau principal | Stainless steel; grade to be confirmed |
| Dimensions hors tout | 120 × 54 × 48 cm; orientation labels not supplied |
| Main functions | Individual front access and wire-grid floors above removable collection pans |
| Mobilité | Stationary base; no casters shown |
| Emballage | 125 × 10 × 53 cm carton package |
ClearSight coordinates B2B enquiries for stainless-steel animal housing and bird-cage projects. Share the intended bird species, quantity, destination and required dimensions so the team can review the requested configuration against the available product information.
Product-specific specifications and commercial details are confirmed during enquiry. The current evidence supports a credible project discussion, while material grade, bar spacing, internal dimensions, safe occupancy, weight basis, price and minimum order quantity remain items for confirmation rather than published assumptions.
Send your project requirements for specification review. A useful enquiry should identify the birds, quantity, destination and any dimensional or material constraints so the quotation can distinguish confirmed facts from options that still require evaluation.
The supplied overall size is 120 × 54 × 48 cm, and the carton package size is 125 × 10 × 53 cm. The source does not label the orientation of each dimension, so orientation and tolerances should be confirmed before site or freight decisions are finalized.
The supplied product table lists birds and pigeons, but species fit cannot be decided from that label alone. Confirm bird size, bar spacing, internal compartment dimensions, door opening and safe occupancy for the intended use.
No fixed commercial values are confirmed in the supplied evidence. Provide the quantity and destination during enquiry so the quotation can state the applicable commercial and delivery terms.
Confirm species fit, bar spacing, internal dimensions, door clearance and safe occupancy before use. Inspect doors, latches, wire grids and collection pans before placing birds inside. Establish cleaning and inspection procedures that match the confirmed material grade and local animal-welfare requirements. This product is passive animal housing and should not be treated as a powered environmental or clinical system.
Nous nous spécialisons exclusivement dans le matériel vétérinaire et de toilettage pour animaux de compagnie, en proposant une qualité « direct d'usine », des options de personnalisation flexibles et un service transfrontalier fiable aux cliniques, distributeurs et acheteurs en gros du monde entier.
Nous sommes spécialisés dans les équipements médicaux et de toilettage pour animaux de compagnie, et nous disposons d'une connaissance approfondie des besoins en matière d'équipements pour les cliniques et les salons, ce qui nous permet de proposer des recommandations de produits ciblées.
Notre usine de 5 000 m² permet de réduire les coûts intermédiaires. Nous proposons la personnalisation des dimensions, du logo et de l'emballage, avec des quantités minimales de commande flexibles pour les échantillons et les commandes en gros.
Nous accompagnons des clients dans plus de 100 pays grâce à notre certification CE. Les commandes standard sont traitées dans un délai de 30 jours et bénéficient d'un service après-vente complet et centralisé.
Notre matériel vétérinaire et de toilettage, vendu directement depuis notre usine, ne cesse de susciter l'éloge des cliniques vétérinaires, des propriétaires de salons, des distributeurs et des importateurs à travers l'Europe et l'Amérique du Nord. Nos clients apprécient la qualité constante de nos produits, nos solutions OEM flexibles et la fiabilité de nos livraisons dans les délais.
Remplissez le formulaire ci-dessous en précisant vos besoins, notamment les caractéristiques du produit, la quantité et les demandes de personnalisation. Nous examinerons votre message et vous répondrons dans un délai de 24 heures ouvrées.
Nous avons rassemblé les questions les plus fréquemment posées par nos acheteurs du monde entier afin de vous aider à trouver rapidement des réponses. Si vous ne trouvez pas ce que vous cherchez, n'hésitez pas à nous envoyer un message.
Des prix directs d'usine, des contrôles qualité rigoureux et des livraisons ponctuelles. Nous proposons un service d'approvisionnement complet et fiable.
Nous proposons des devis, des échantillons, la fabrication en sous-traitance (OEM), le suivi des expéditions et un service après-vente complet.
Oui. Nous personnalisons les dimensions, les matériaux, le logo et l'emballage en fonction de vos échantillons ou de vos plans.
Nous acceptons les virements bancaires (T/T), les lettres de crédit (L/C), PayPal et Western Union. Des conditions de paiement flexibles sont proposées à nos partenaires de longue date.
