Attrezzature professionali per cliniche veterinarie e saloni di toelettatura | Fornitura diretta dalla fabbrica, produzione OEM su misura e consegna rapida.
A double-tier 304 stainless-steel cage with four primary front sections, tray access zones, and a caster-mounted base for requirements-based B2B enquiries.
For clinics, animal-care facilities, distributors, and project buyers, stainless steel cages veterinary sourcing starts with a clear view of the real configuration. This double-tier cage combines four front-access sections within one mobile stainless-steel structure. The supplied configuration shows a rectangular frame, wire-mesh enclosure, individually latched front doors, pull-out metal tray zones, and a caster-mounted base.
The two-tier arrangement uses vertical space while keeping the principal access points visible from the front. Buyers can use this page for an initial requirements discussion and then confirm the application, internal dimensions, load requirements, species scope, and project conditions before ordering.
The front elevation is organized into upper and lower cage levels. Each level presents two primary mesh door sections, producing four primary front sections across the complete unit. Latch plates and horizontal latch hardware are visible on the front doors. Side and top wire-mesh panels complete the enclosure while preserving a consistent open-grid structure.
Handled tray zones sit between or beneath the cage sections. These visible pull-out areas provide a defined point for tray access without requiring an unsupported claim about cleaning time or sanitation performance. The base is fitted with casters so the assembled unit can be repositioned when site conditions and operating procedures permit.
The cage presents its primary access points on the front, allowing a team to identify the relevant section before opening a door. Separate latch hardware is visible for the front door sections, while handled tray zones provide a distinct access point below the cage floors. This arrangement supports an orderly discussion of how the unit may fit into an existing animal-care workflow.
The supplied photos show front-opening mesh doors. Door clearances, operating space, and local handling procedures should be reviewed against the intended installation area before purchase.
Latch plates and bars can be inspected in the product views. The final locking method, operating procedure, and suitability for a specific animal or use case should be confirmed for the selected order.
Pull-out metal tray zones are visible beneath the cage sections. Buyers should confirm tray construction, removal clearance, cleaning protocol, and compatible agents according to their facility requirements.
The following values come from the supplied product material and are suitable for an initial project conversation. Final drawings, order specifications, and packing details should be reconfirmed before production or shipment.
| Configurazione del prodotto | Double-tier cage with four primary front sections |
| Materiale principale | acciaio inossidabile 304 |
| Dimensioni complessive | 80 × 80 × 160 cm |
| Access | Individually latched front mesh doors |
| Tray structure | Pull-out metal tray zones |
| Mobilità | Caster-mounted base |
| Dimensioni della confezione | 86 × 86 × 165 cm |
ClearSight can coordinate a product-specific review after receiving the intended application, required quantity, destination, and project needs. The review should establish which specifications, structural options, documentation, packing arrangement, commercial terms, and schedule apply to the selected order rather than assuming that a company-level capability applies automatically to this cage.
Send the product image or page link together with the required quantity, destination, application, and any dimension or documentation needs. The image CTA is artwork; the published page should pair it with a real enquiry button or contact form.
The supplied product material identifies 304 stainless steel. Any requested material report or order-specific material requirement should be confirmed during the enquiry.
The supplied overall size is 80 × 80 × 160 cm, and the supplied package size is 86 × 86 × 165 cm. Internal dimensions were not provided and should be confirmed before technical selection.
No verified load rating or exact species scope is published on this page. Share the intended application so the supplier can evaluate and confirm the relevant requirements for the order.
This product is presented for professional veterinary and animal-care procurement. Confirm the intended species or use, internal dimensions, load requirements, door and latch procedure, installation clearance, tray-handling method, cleaning protocol, applicable documents, and local facility requirements before ordering and use. Follow the final supplier documentation and the facility’s own safety and animal-care procedures.
Ci occupiamo esclusivamente di attrezzature veterinarie e per la toelettatura degli animali da compagnia, offrendo qualità direttamente dal produttore, personalizzazioni flessibili e un servizio transfrontaliero affidabile a cliniche, distributori e acquirenti all’ingrosso in tutto il mondo.
Siamo specializzati in attrezzature mediche e per la toelettatura degli animali da compagnia e, grazie alla nostra profonda conoscenza delle esigenze delle cliniche e dei saloni di toelettatura, siamo in grado di fornire consigli mirati sui prodotti.
Il nostro stabilimento di 5.000 m² ci permette di ridurre i costi intermedi. Offriamo la personalizzazione di dimensioni, logo e confezione, con quantità minime d’ordine flessibili sia per i campioni che per gli ordini all’ingrosso.
Serviamo clienti in oltre 100 paesi con certificazione CE. Gli ordini standard vengono evasi entro 30 giorni, con un'assistenza post-vendita completa e centralizzata.
Le nostre attrezzature per la veterinaria e la toelettatura, fornite direttamente dalla nostra fabbrica, hanno riscosso un consenso unanime da parte di cliniche veterinarie, titolari di saloni di toelettatura, distributori e importatori in tutta Europa e in Nord America. I clienti apprezzano la nostra qualità costante, le soluzioni OEM flessibili e l’affidabilità nelle consegne puntuali.
Compila il modulo sottostante indicando le tue esigenze, compresi i dettagli del prodotto, la quantità e le richieste di personalizzazione. Esamineremo il tuo messaggio e ti risponderemo entro 24 ore lavorative.
Abbiamo raccolto le domande più frequenti poste dagli acquirenti di tutto il mondo per aiutarti a trovare rapidamente le risposte che cerchi. Se non riesci a trovare ciò che ti serve, non esitare a inviarci un messaggio.
Prezzi di fabbrica, rigorosi controlli di qualità e consegne puntuali. Offriamo un servizio di approvvigionamento completo e affidabile.
Forniamo preventivi, campioni, produzione OEM, monitoraggio delle spedizioni e assistenza post-vendita completa.
Sì. Personalizziamo dimensioni, materiale, logo e confezione in base ai vostri campioni o disegni.
Accettiamo pagamenti tramite bonifico bancario (T/T), lettera di credito (L/C), PayPal e Western Union. Per i partner di lunga data sono disponibili condizioni di pagamento flessibili.
