Equipos profesionales para hospitales veterinarios y salones de belleza para mascotas | Suministro directo de fábrica, fabricación a medida (OEM) y entrega rápida.
A double-tier 304 stainless-steel cage with four primary front sections, tray access zones, and a caster-mounted base for requirements-based B2B enquiries.
For clinics, animal-care facilities, distributors, and project buyers, stainless steel cages veterinary sourcing starts with a clear view of the real configuration. This double-tier cage combines four front-access sections within one mobile stainless-steel structure. The supplied configuration shows a rectangular frame, wire-mesh enclosure, individually latched front doors, pull-out metal tray zones, and a caster-mounted base.
The two-tier arrangement uses vertical space while keeping the principal access points visible from the front. Buyers can use this page for an initial requirements discussion and then confirm the application, internal dimensions, load requirements, species scope, and project conditions before ordering.
The front elevation is organized into upper and lower cage levels. Each level presents two primary mesh door sections, producing four primary front sections across the complete unit. Latch plates and horizontal latch hardware are visible on the front doors. Side and top wire-mesh panels complete the enclosure while preserving a consistent open-grid structure.
Handled tray zones sit between or beneath the cage sections. These visible pull-out areas provide a defined point for tray access without requiring an unsupported claim about cleaning time or sanitation performance. The base is fitted with casters so the assembled unit can be repositioned when site conditions and operating procedures permit.
The cage presents its primary access points on the front, allowing a team to identify the relevant section before opening a door. Separate latch hardware is visible for the front door sections, while handled tray zones provide a distinct access point below the cage floors. This arrangement supports an orderly discussion of how the unit may fit into an existing animal-care workflow.
The supplied photos show front-opening mesh doors. Door clearances, operating space, and local handling procedures should be reviewed against the intended installation area before purchase.
Latch plates and bars can be inspected in the product views. The final locking method, operating procedure, and suitability for a specific animal or use case should be confirmed for the selected order.
Pull-out metal tray zones are visible beneath the cage sections. Buyers should confirm tray construction, removal clearance, cleaning protocol, and compatible agents according to their facility requirements.
The following values come from the supplied product material and are suitable for an initial project conversation. Final drawings, order specifications, and packing details should be reconfirmed before production or shipment.
| Configuración del producto | Double-tier cage with four primary front sections |
| Material principal | 304 stainless steel |
| Tamaño total | 80 × 80 × 160 cm |
| Access | Individually latched front mesh doors |
| Tray structure | Pull-out metal tray zones |
| Movilidad | Base con ruedas |
| Tamaño del paquete | 86 × 86 × 165 cm |
ClearSight can coordinate a product-specific review after receiving the intended application, required quantity, destination, and project needs. The review should establish which specifications, structural options, documentation, packing arrangement, commercial terms, and schedule apply to the selected order rather than assuming that a company-level capability applies automatically to this cage.
Send the product image or page link together with the required quantity, destination, application, and any dimension or documentation needs. The image CTA is artwork; the published page should pair it with a real enquiry button or contact form.
The supplied product material identifies 304 stainless steel. Any requested material report or order-specific material requirement should be confirmed during the enquiry.
The supplied overall size is 80 × 80 × 160 cm, and the supplied package size is 86 × 86 × 165 cm. Internal dimensions were not provided and should be confirmed before technical selection.
No verified load rating or exact species scope is published on this page. Share the intended application so the supplier can evaluate and confirm the relevant requirements for the order.
This product is presented for professional veterinary and animal-care procurement. Confirm the intended species or use, internal dimensions, load requirements, door and latch procedure, installation clearance, tray-handling method, cleaning protocol, applicable documents, and local facility requirements before ordering and use. Follow the final supplier documentation and the facility’s own safety and animal-care procedures.
Nos especializamos exclusivamente en equipos veterinarios y de cuidado de mascotas, ofreciendo calidad directa de fábrica, personalización flexible y un servicio transfronterizo confiable para clínicas, distribuidores y compradores mayoristas de todo el mundo.
Nos especializamos en equipos médicos y de aseo para mascotas, y contamos con un profundo conocimiento de las necesidades de equipamiento de clínicas y salones para ofrecer recomendaciones de productos específicas.
Nuestra fábrica de 5,000 m² reduce los costos intermedios. Ofrecemos personalización de tamaño, logotipo y empaque, con un pedido mínimo flexible tanto para muestras como para pedidos al por mayor.
Atendemos a clientes en más de 100 países con certificación CE. Los pedidos estándar se completan en un plazo de 30 días, con un servicio integral de posventa.
Nuestro equipo veterinario y de peluquería canina, que vendemos directamente de fábrica, ha recibido elogios constantes de clínicas veterinarias, propietarios de salones de belleza, distribuidores e importadores de toda Europa y América del Norte. Nuestros clientes valoran nuestra calidad constante, nuestras soluciones OEM flexibles y nuestra entrega puntual y confiable.
Llena el siguiente formulario con tus requisitos, incluyendo los detalles del producto, la cantidad y las necesidades de personalización. Revisaremos tu mensaje y te responderemos en un plazo de 24 horas hábiles.
Hemos recopilado las preguntas más comunes de compradores de todo el mundo para ayudarte a encontrar respuestas rápidamente. Si no encuentras lo que necesitas, no dudes en enviarnos un mensaje.
Precios directos de fábrica, controles de calidad rigurosos y entregas puntuales. Ofrecemos un servicio confiable de abastecimiento integral.
Ofrecemos cotizaciones, muestras, producción OEM, seguimiento de envíos y un servicio completo de posventa.
Sí. Personalizamos el tamaño, el material, el logotipo y el empaque según sus muestras o planos.
Aceptamos transferencias bancarias (T/T), cartas de crédito (L/C), PayPal y Western Union. Ofrecemos condiciones flexibles para nuestros socios de larga data.
