Profesyonel Evcil Hayvan Hastanesi ve Bakım Salonu Ekipmanları | Fabrikadan Doğrudan Tedarik, Özel OEM Üretimi ve Hızlı Teslimat.
Eight-compartment veterinary cat cages in a 3 + 3 + 2 stainless-steel cabinet with individual wire-bar front doors, metal tray structure, and a caster-mounted base.
These veterinary cat cages combine eight visible front-access compartments in a space-conscious three-tier cabinet. The 3 + 3 + 2 arrangement keeps each door accessible from the front. Buyers comparing stainless steel cages and animal housing can use this configuration for a requirements-based enquiry.
The cabinet uses 304 stainless-steel cage and main construction, wire-bar doors, external latches, metal tray or pan structure, and a caster-mounted base. Confirm compartment fit, intended animal weight, handling procedures, and site conditions before selection.
The upper and middle tiers each contain three compartments, while the lower tier contains two larger visible compartments. Each compartment has its own outward-opening, side-hinged wire-bar front door with external latch hardware. This arrangement gives buyers a clear basis for discussing how the cabinet will be used, where it will be positioned, and whether each compartment suits the intended cats.
The supplied material does not confirm internal compartment dimensions or a load rating. Those values should be checked against animal size, weight, planned holding duration, bedding or mat requirements, and the facility’s handling protocol before a quotation is finalized.
The veterinary cat cages are designed around mechanical front access rather than powered controls. Wire-bar doors preserve visibility through the front, while external latches provide a clear physical access point for each compartment. Teams should verify latch operation and door security as part of their own intake, transfer, monitoring, and release procedures.
The cage and main cabinet construction are identified as 304 stainless steel in the supplied material. This material statement does not extend automatically to every fitting, tray component, wheel, or fastener. Cleaning agents, contact times, drying steps, and maintenance methods should be confirmed for the final supplied configuration.
Metal tray or pan elements are listed and visible, supporting routine cleaning workflows. The exact tray count and included components have not been confirmed, so buyers should request a complete accessory and tray schedule with the quotation.
Four casters are visible across the front and angled product views. They support cabinet repositioning, but the exact brake arrangement and safe movement procedure remain project-confirmation items. Move the cabinet only under an approved facility procedure and with compartments managed appropriately.
The values below come from the supplied product and packaging material. Package size and gross weight are logistics values; they are not overall product dimensions or net product weight. Reconfirm packing, quantity, destination, customization, and schedule before procurement.
| Item | Confirmed specification |
|---|---|
| Product configuration | Three-tier mobile cabinet, 3 + 3 + 2 arrangement |
| Visible capacity | 8 compartments and 8 front doors |
| Main material | 304 stainless-steel cage and main construction |
| Front access | Individual side-hinged wire-bar doors with external latches |
| Tray structure | Metal tray or pan structure; exact count to be confirmed |
| Mobility | Four-caster cabinet base; brake specification to be confirmed |
| Single-package size | 125 x 70 x 96 cm |
| Single-package gross weight | 125 kg |
| Packing | Wooden case |
| Supplier-listed MOQ | 2 pcs; reconfirm in quotation |
| Supplier-listed lead time | 7-25 days; reconfirm for quantity and customization |
ClearSight accepts OEM and ODM enquiries subject to project-specific technical and commercial review. Share the intended application, quantity, destination, and required changes so the supplier can assess the request against the actual product configuration.
A useful enquiry should also identify the intended cats, preferred compartment fit, site access constraints, cleaning workflow, and any documentation or compliance requirements. This helps the quotation separate confirmed supply from options that still require engineering, sourcing, or commercial confirmation.
Send your project requirements and ask for a configuration-specific quotation. The response should confirm what is included, which values remain subject to approval, and what information is still needed before technical selection or ordering.
Confirm internal compartment dimensions, intended animal size and weight, the required load basis, bedding or mat use, access procedures, and facility protocols. These values are not established by the current supplied material.
No. This is the supplied single-package size. It must not be used as the cabinet’s overall dimensions. The listed 125 kg value is the single-package gross weight, not the cabinet’s net weight.
Metal tray or pan structure is listed and visible, but the exact tray count is not confirmed. External hook stands appear in one supplied image but are not proven to be included. Request a written included-accessory schedule with the quotation.
OEM and ODM support is supplier-listed and may be discussed for a specific project. Any change remains subject to technical feasibility, commercial review, quantity, destination, and final written confirmation.
Use this non-powered holding cage only within trained professional procedures. Confirm compartment fit, door and latch security, caster stability, cleaning compatibility, monitoring practices, and local facility requirements before use. This page does not establish a treatment function, clinical outcome, load rating, certification, warranty, or included-accessory list.
Yalnızca veterinerlik ve evcil hayvan bakım ekipmanlarına odaklanarak, dünya çapındaki kliniklere, distribütörlere ve toptan alıcılara fabrikadan doğrudan kalite, esnek özelleştirme ve güvenilir sınır ötesi hizmet sunuyoruz.
Evcil hayvan sağlık ve bakım ürünleri konusunda uzmanlaşmış bir şirketiz; klinik ve salon ekipmanlarına ilişkin ihtiyaçları derinlemesine kavrayarak, hedef odaklı ürün önerileri sunuyoruz.
5.000 m²'lik fabrikamız sayesinde ara maliyetleri azaltıyoruz. Numune ve toplu siparişler için esnek minimum sipariş miktarı (MOQ) seçenekleriyle boyut, logo ve ambalaj özelleştirme hizmetleri sunuyoruz.
CE sertifikası ile 100'den fazla ülkedeki müşterilerimize hizmet veriyoruz. Standart siparişler 30 gün içinde tamamlanmakta olup, satış sonrası destek hizmetleri de tek elden sunulmaktadır.
Fabrikadan doğrudan tedarik ettiğimiz veterinerlik ve bakım ekipmanlarımız, Avrupa ve Kuzey Amerika’daki veteriner klinikleri, salon sahipleri, distribütörler ve ithalatçılar tarafından sürekli olarak takdir toplamaktadır. Müşterilerimiz, istikrarlı kalitemizi, esnek OEM çözümlerimizi ve güvenilir zamanında teslimatımızı takdir etmektedir.
Aşağıdaki formu, ürün detayları, miktar ve özelleştirme talepleriniz dahil olmak üzere ihtiyaçlarınızı belirterek doldurun. Mesajınızı inceleyip 24 iş saati içinde yanıt vereceğiz.
Hızlı bir şekilde yanıt alabilmeniz için dünya çapındaki alıcılardan gelen sık sorulan soruları derledik. Aradığınızı bulamazsanız, bize mesaj göndermekten çekinmeyin.
Fabrika doğrudan fiyatlandırması, sıkı kalite denetimi ve zamanında teslimat. Güvenilir tek elden tedarik hizmeti sunuyoruz.
Fiyat teklifi, numune temini, OEM üretimi, sevkiyat takibi ve eksiksiz satış sonrası destek hizmetleri sunuyoruz.
Evet. Örneklerinize veya çizimlerinize göre boyut, malzeme, logo ve ambalajı özelleştiriyoruz.
T/T, L/C, PayPal ve Western Union ile ödeme kabul ediyoruz. Uzun vadeli iş ortaklarımız için esnek ödeme koşulları sunuyoruz.
