Professionelle Ausrüstung für Tierkliniken und Tierpflegesalons | Direkt vom Hersteller, maßgeschneiderte OEM-Lösungen und schnelle Lieferung.
A two-tier mobile veterinary cabinet with five visible front-access zones, scoped 304 stainless-steel construction, and confirmed project and packing dimensions.
This canine oxygen cage brings five visible front-access zones into one two-tier cabinet for veterinary clinics, animal hospitals, distributors, importers, and project buyers. The supplied configuration combines three upper doors with two larger lower doors, giving buyers a clear starting point for space planning and requirements-based sourcing within a broader veterinary equipment project.
The cabinet uses 304 stainless-steel cage and main-cabinet construction as stated in the supplied product attributes. A caster-mounted base, two visible side IV poles, and a compact vertical arrangement support practical equipment-layout discussions before quotation. Exact zone functions, utility interfaces, and controlled parameters should be confirmed for the ordered configuration.
Five visible front-access zones in a three-over-two arrangement
Four wire-bar fronts and one transparent upper-right door
304 stainless-steel cage and main-cabinet construction
Mobile cabinet format with two visible side IV poles
The front elevation shows three upper doors and two lower doors. Four zones use wire-bar fronts, while the upper-right zone uses a transparent sealed-style door. This mixed access arrangement is a visible product fact; it should not be interpreted as proof that every zone performs the same function.
Five digital display areas are visible across the cabinet, aligned with the five front-access zones. These interfaces help buyers identify where control information is presented, but the supplied materials do not confirm independent operation or the parameters governed by each display. For technical evaluation, request the final control architecture and operating documentation.
Two-tier cabinet with three upper zones and two lower zones
Five front-access doors in total
One transparent upper-right door
Four wire-bar front-access doors
The canine oxygen cage includes five visible display areas, two side-mounted IV-pole assemblies, and a caster-mounted base. These visible elements help project teams discuss room placement, staff access, monitoring workflow, and the information needed for a more accurate quotation.
The five displays are clearly visible in the supplied product views. Confirm the controlled parameters, set-point ranges, alarm behavior, and operating procedure before selecting the equipment for a specific site.
Two IV-pole assemblies are visibly attached at the sides of the cabinet. Their final supplied configuration, load limits, and approved use should be confirmed in the order documentation.
The active-state photographs show red illumination inside the five visible zones. The images establish only the visible state; they do not establish its technical purpose or any treatment result. Ask the supplier to define the feature and its operating instructions for the final configuration.
The confirmed values below support early room-layout and freight discussions. Allow additional working clearance around doors, IV poles, utilities, staff circulation, and service access. Internal clearances and installation requirements must be confirmed before technical approval.
| Artikel | Bestätigte Spezifikation |
|---|---|
| Produktkonfiguration | Five visible front-access zones: three upper and two lower |
| Cage/main cabinet construction | Edelstahl 304 |
| Gesamtgröße | 150 (L) × 70 (D) × 181 (H) cm |
| Visible display areas | Five |
| Mobilität | Caster-mounted cabinet base with four visible wheels |
| Visible attached accessories | Two side IV-pole assemblies |
| Bruttogewicht | 256 kg |
| Verpackungsgröße | 158 × 83 × 200 cm |
ClearSight coordinates international B2B enquiries for veterinary equipment and can review product-specific requirements with the relevant supply team. Share the destination market, required quantity, intended animal profile, proposed zone functions, utility conditions, and documentation needs so the final quotation can identify confirmed values and open technical questions.
Requirements may be reviewed against the exact product configuration, engineering feasibility, destination rules, and commercial terms. Availability of any requested modification must be confirmed in writing for the final order rather than assumed from category-level supplier information.
Share requirements — Send the product image or page reference, estimated quantity, destination, animal profile, intended zone functions, and preferred project schedule.
Confirm configuration — Review internal clearances, control architecture, oxygen and electrical interfaces, utilities, load requirements, installation space, cleaning procedure, and required documents.
Receive quotation — Obtain the confirmed configuration, commercial terms, packing method, production information, freight basis, and available documentation.
Send your project requirements to receive a configuration-focused response. A useful enquiry should include the destination country or region, target quantity, intended animals, room constraints, oxygen-service arrangement, electrical conditions, required interfaces, and any local documentation expectations.
No. The supplied photographs confirm five front-access zones, but they do not prove that every zone has the same oxygen function or independent control. Request the final zone-function schedule and control description before technical selection.
The supplied materials confirm an overall size of 150 × 70 × 181 cm, a package size of 158 × 83 × 200 cm, and a gross weight of 256 kg. Internal dimensions, utility requirements, and load ratings require confirmation.
Provide the intended application, animal profile, quantity, destination, access route, room layout, required zone functions, oxygen-service plan, electrical conditions, interface needs, and documentation expectations. This information helps the supplier identify the correct questions before issuing a quotation.
This equipment is intended for professional veterinary environments. Product selection, installation, oxygen and electrical connections, operation, monitoring, cleaning, maintenance, and fire-safety controls should follow the final manufacturer instructions, trained-personnel procedures, and applicable local requirements. Confirm operating parameters and safety documentation before use.
Wir konzentrieren uns ausschließlich auf Ausrüstung für Tierärzte und Tierpflege und bieten Kliniken, Händlern und Großabnehmern weltweit Qualität direkt ab Werk, flexible Anpassungsmöglichkeiten und einen zuverlässigen grenzüberschreitenden Service.
Wir sind auf medizinische und Pflegeprodukte für Haustiere spezialisiert und verfügen über fundierte Kenntnisse hinsichtlich der Ausstattungsanforderungen von Tierkliniken und Tierpflegesalons, um gezielte Produktempfehlungen geben zu können.
Unsere 5.000 m² große Produktionsstätte sorgt für eine Reduzierung der Zwischenkosten. Wir bieten individuelle Anpassungen hinsichtlich Größe, Logo und Verpackung sowie flexible Mindestbestellmengen für Muster und Großaufträge.
Wir beliefern Kunden in über 100 Ländern mit CE-Zertifizierung. Standardaufträge werden innerhalb von 30 Tagen abgewickelt, wobei wir einen umfassenden Kundendienst aus einer Hand bieten.
Unsere direkt ab Werk gelieferten Tierarzt- und Pflegegeräte finden bei Tierarztpraxen, Salonbetreibern, Händlern und Importeuren in ganz Europa und Nordamerika durchweg großen Anklang. Unsere Kunden schätzen unsere gleichbleibende Qualität, unsere flexiblen OEM-Lösungen und unsere zuverlässige, pünktliche Lieferung.
Bitte füllen Sie das untenstehende Formular mit Ihren Anforderungen aus, einschließlich Produktdetails, Menge und Anpassungswünschen. Wir werden Ihre Nachricht prüfen und Ihnen innerhalb von 24 Arbeitsstunden antworten.
Wir haben häufig gestellte Fragen von Käufern aus aller Welt zusammengestellt, damit Sie schnell Antworten finden. Sollten Sie nicht fündig werden, können Sie uns gerne eine Nachricht senden.
Preise direkt ab Werk, strenge Qualitätskontrollen und pünktliche Lieferung. Wir bieten einen zuverlässigen Beschaffungsservice aus einer Hand.
Wir bieten Ihnen Angebotserstellung, Musterlieferung, OEM-Fertigung, Sendungsverfolgung und umfassenden Kundendienst.
Ja. Wir passen Größe, Material, Logo und Verpackung anhand Ihrer Muster oder Zeichnungen individuell an.
Wir akzeptieren T/T, L/C, PayPal und Western Union. Für langfristige Partner bieten wir flexible Zahlungsbedingungen an.
