Professional Pet Hospital & Grooming Salon Equipment | Factory Direct Supply, Custom OEM & Fast Delivery.
One large floor-standing dog enclosure with a full-height front access door, open-bar upper sections, solid lower side and rear panels, and confirmed overall dimensions of 191 cm L × 89 cm W × 191 cm H.
These large veterinary dog cages provide a clearly defined, single-compartment enclosure for professionally supervised dog housing or holding. The floor-standing form combines a full-height front access door with open wire-bar upper sections and solid lower side and rear panels. For buyers comparing stainless steel pet cages, this configuration offers a direct starting point for discussing animal fit, site layout, cleaning arrangements, and quotation requirements.
The verified overall size is 191 cm L × 89 cm W × 191 cm H. The main cage construction is 304 stainless steel, while the grade of selected latches, hinges, welds, and other hardware should be confirmed for the quoted configuration. The enclosure is shown with an open top, one continuous interior space, and no visible casters.
One large compartment supports a straightforward supervised housing workflow.
Open upper bars maintain visibility and passive airflow around the enclosure.
Solid lower side and rear panels create a clearly defined lower boundary.
Confirmed overall dimensions support an initial footprint and access review.
The front face uses one outward-opening, side-hinged, full-height wire-bar door with visible latch hardware. This access geometry should be considered when planning the approach path and door-swing clearance. The photographs show one continuous compartment with no internal divider, so buyers should provide the intended animal profile and required usable interior space before selection.
The upper side and rear sections remain open-bar, while the lower side and rear areas use solid panels. This arrangement supports observation from multiple directions without implying a sealed, powered, climate-controlled, or treatment function. The open top and floor-standing base should be reviewed against the intended room, outdoor shelter, or other supervised installation conditions.
One open-top compartment.
One full-height side-hinged front wire-bar door.
Open wire-bar upper sections with solid lower side and rear panels.
Floor-standing rectangular frame with no visible wheels or mobility system.
For professional teams evaluating veterinary dog cages, the visible structure supports a practical review of access, observation, placement, and cleaning workflow. Final suitability still depends on the animal profile, clear internal dimensions, load requirements, floor interface, and the facility's operating procedures.
The single full-height door provides a direct front approach to the enclosure. Confirm the required door-swing clearance, aisle width, restraint procedure, and safe transfer method for the intended dog before installation or use.
Open upper bars allow staff to observe the enclosure from the front and sides and permit passive air movement. They do not create a controlled environment, and the product should not be described or used as an oxygen, heating, cooling, or treatment system.
Solid lower panels on the sides and rear define the lower enclosure boundary. Buyers should confirm the required floor insert, drainage arrangement, cleaning-agent compatibility, and exact included components during quotation because no removable pan or accessory set is confirmed.
The confirmed information below supports an initial site and sourcing discussion. Internal clear dimensions, animal loading, included items, packing, logistics, compliance documents, and commercial terms remain quotation-stage decisions.
| Item | Confirmed specification |
|---|---|
| Product configuration | One large open-top, single-compartment enclosure |
| Main material | 304 stainless steel main cage construction; selected hardware grade to be confirmed |
| Overall size | 191 cm L × 89 cm W × 191 cm H |
| Main functions | Professionally supervised dog housing or holding; visibility through open upper bars; defined lower side and rear boundaries |
| Access | One outward-opening, side-hinged, full-height front wire-bar door |
| Mobility | Floor-standing frame with no visible casters or wheels |
| Customization | Customized logo acceptance is listed; other changes require feasibility and quotation confirmation |
Use the overall dimensions for preliminary footprint planning only. Before ordering, confirm the clear internal size, intended animal weight and behavior, installation surface, access route, door clearance, drainage, cleaning method, shipped assembly state, and exact included components.
ClearSight can review the intended animal profile, facility conditions, required quantity, destination, and custom-logo request before quotation. This requirements-led process helps keep the proposed configuration aligned with the buyer's site and sourcing needs without treating unconfirmed specifications as settled facts.
The current page is suitable for lead generation and initial project discussion. A technical selection or purchase decision requires confirmation of internal dimensions, rated loading, included components, cleaning and floor requirements, export packing, logistics data, product-specific documents, warranty, price, payment, availability, and production timing.
Custom logo support is available for project review.
Requested dimensional or structural changes require separate feasibility confirmation.
Materials, accessories, floor arrangements, and packing must be defined in the quotation.
Share requirements — provide the intended animal type and size, expected quantity, installation setting, destination, access route, and required delivery timing.
Confirm configuration — verify clear internal dimensions, supported load, door clearance, floor and cleaning arrangement, included components, logo details, and any destination-market document needs.
Receive quotation — obtain the confirmed configuration, commercial terms, packing method, package dimensions, weights, production timing, and delivery information available for the project.
Send your animal profile, facility layout, required quantity, destination, and customization needs. The supplier can then return a project-specific configuration and quotation with the technical, packing, logistics, and commercial fields that are not yet confirmed on this page.
The supplied views show one large, open-top compartment with one side-hinged full-height front door, open upper bars, solid lower side and rear panels, and a floor-standing base.
No universal fit is claimed. Suitability depends on clear internal space, the animal's size, weight, behavior, supervision needs, the facility layout, and the confirmed load rating. Share these requirements for technical review.
Custom logo acceptance is confirmed. Any change to dimensions, structure, materials, accessories, or packing requires separate feasibility and quotation confirmation.
Use only under trained professional supervision and follow the facility's animal-handling, monitoring, cleaning, and emergency procedures. Confirm animal fit, rated loading, door and latch checks, floor stability, drainage, cleaning-agent compatibility, and the exact supplied components before use. Obtain the current product manual and destination-specific requirements from the supplier. This open-bar enclosure is not an oxygen-delivery, fire-protection, heating, cooling, or clinical-treatment system; keep ignition sources and incompatible chemicals away and comply with applicable local animal-welfare, occupational-safety, sanitation, and installation rules.
We focus exclusively on veterinary and pet grooming equipment, delivering factory-direct quality, flexible customization, and reliable cross-border service for clinics, distributors and wholesale buyers worldwide.
We specialize in pet medical & grooming gear, with deep insight into clinic and salon equipment needs to deliver targeted product recommendations.
Our 5,000㎡ factory cuts intermediate costs. We offer size, logo and packaging customization with flexible MOQ for samples and bulk orders.
We serve clients across 100+ countries with CE certification. Standard orders are finished within 30 days, with full one-stop after-sales support.
Our factory-direct veterinary and grooming equipment has won consistent praise from vet clinics, salon owners, distributors and importers across Europe and North America. Clients value our stable quality, flexible OEM solutions and reliable on-time delivery.
Fill in the form below with your requirements, including product details, quantity and customization needs. We will review your message and reply within 24 working hours.
We have collected common questions from global buyers to help you get answers quickly. If you cannot find what you need, feel free to send us a message.
Factory direct pricing, strict quality inspection and on-time delivery. We offer reliable one-stop procurement service.
We provide quotation, sampling, OEM production, shipment tracking and full after-sales support.
Yes. We customize size, material, logo and packaging based on your samples or drawings.
We accept T/T, L/C, PayPal and Western Union. Flexible terms are available for long-term partners.
